Ads code here

DIY Log Cabin Place Cards

Do not forget! follow DIYSelfy on facebook to get new and fresh ideas and updates everyday!

There’s something charming about Popsicle stick crafts – even more so when you use miniature Popsicle sticks! The roof of these log cabin-inspired structures is the perfect size for a place card. They would also be cute for decorating a shelf or a mantel. The smoke coming out the chimney adds the perfect touch of whimsy.

Materials needed: mini Popsicle sticks, paper, craft glue, scissors, bone folder, ruler, pencil, stuffing or cotton balls.

Step 1: Take two mini Popsicle sticks and place them 2 inches apart. Glue two more sticks across the first two, about ½” from each end.
Step 2: With a pencil, mark the midpoint of each intersection of sticks. This will be the length of your side walls.
Step 3: Cut one stick to fit inside the pencil marks.
Step 4: Using the short, cut stick as a guide, cut the ends off eight sticks.
Step 5: Apply a line of glue to the longer sides, and attach two sticks along their skinny side.
Step 6: Insert and glue two smaller ‘side’ sticks, along their skinny side.
Step 7: Continue until you have 4 short sides stacked up, and 5 long sides stacked up. Let dry.
Step 8: Cut a 3” x 4” piece of cardstock. Fold in half and crease firmly with the bone folder.
Step 9: Write your guests name across one side. Gently glue to top of cabin.
Step 10: Take a ¾” x 2 ½” strip of paper and crease it with a bone folder every ½.” You should have 5 segments.
Step 11: Fold the strip of paper into a chimney shape and secure with glue. Let dry.
Step 12: Cut a tiny triangle into one side of the bottom of the chimney.
Step 13: Cut a tiny matching triangle into the opposite side of the bottom of the chimney.
Step 14: Place a line of glue along the bottom edge of the chimney and attach to roof.
Step 15: Using a pencil to poke it in, add a small bit of stuffing or ripped cotton ball coming out of the chimney.

via ohhappyday

Δημοσίευση σχολίου