Ads code here

"No Sew" Fabric Hearts

Do not forget! follow DIYSelfy on facebook to get new and fresh ideas and updates everyday!

Sometimes you just end up with little pieces of fabric that you just done know what to do with. If that's the case, here is a really quick and simple idea that as well as taking no time at all looks scrumptious. A pretty heart decoration and still plenty of time to make one for Valentine's Day!


You will need : 1.5mm wire approx 50cm, Scrap pieces of cotton fabric, 30cm of ribbon, pinking shears

Step one: Using the pinking shears cut your fabric into small strips approx 1.5cm x 8cm


Step two: Bend the wire in half. The bend at the bottom forms the point of the heart. Now curve the two top ends of the wire inwards to form a heart shape. Secure the shape with a twist where the two ends meet.



Step three: You are now ready to starting adding the fabric. This is really easy - simply knot each strip of fabric individually around the wire. Make sure it is tied tightly and push each piece close together as you work your way around the wire heart shape. From time to time you may need to re-shape the wire and again at the end.


Step four: Once the wire heart is full of tightly packed fabric pieces use the pinking shears to trim the ends of the fabric. This makes the heart much neater and allows the heart shape to "emerge" from under the fabric. Keep trimming until you are happy with the shape and add your piece of colourful ribbon for hanging.

via hopeandgloria

Δημοσίευση σχολίου